click start control panel →
Step 2:


Double click the Network Connection icon
Step 3:

double click on Local Area Connection and select Properties and click the General
Step 4:

select Internet Protocol (TCP / IP) and click Properties
Step 5:

select obtain an IP address automatically and obtain DNS server address automatically, and then click OK
Step 6:

enter the web address Port ADSL 2 / 2 Router's default IP address: "192.168.1.1" in the Address box and press enter.
Step 7:

enter Username: admin and password admin, and then click OK
Step 8:

after Log In, you will enter the SANEX's Home
Click the Advanced Setup
Click Edit
VPI column filled with 8

VCI column filled 81, and then click Next
Select settingan PPP over Ethernet (PPPoE) on the Connection Type → click Next
Username column filled speedy diikuti@telkom.net number, for example 141406100439@telkom.net

Password in the fields filled in accordance with the password → Next
Click Next
Click Save
Click Save / Reboot
To verify whether the modem is connect or not, click the Device Info
Have any posts This information reflects the current status of your DSL connection.

SANEX modem has been successfully installed
Autosetting with the application, he added, customers are not only easier to install and modem settings, tetepi also reset the settings or post-activation during maintenance.

"Definitive do with modern settings independently, it will reduce the cost of installation setter for the customers,"