SETTING MODEM BILLION PPPoE WINDOWS
XP
Step 1:
click start control panel →
Step 2:
Double click the Network Connection icon
Step 3:
double click on Local Area Connection icon and click Properties
Step 4:
select Internet Protocol (TCP / IP) and click Properties
Step 5:
select obtain an IP address automatically and obtain DNS server address
automatically, and then click OK
Step 6:
enter the web address: "192.168.1.1" in the Address box and press enter.
Step 7:
enter Username: admin and Password: admin, then click Log In
Step 8:
after Log In, you will enter on the Linksys's Home → Quiick Start
Click Next
Set the new password click Next →
Select Time Zone → click Next
Settingan Select PPPoE / PPPoA → click Next
In the username field enter numbers speedy diikuti@telkom.net
In the password field, enter a password that has been obtained
VPI: 8, VCI: 81
Column Connection Type selected on the settingan PPPoELLC
Click Next
Step 9:
Back to Home → Interface → Internet Setup
Ø → Bridge Encapsulation
Encapsulation column, for settingan bridge mode, select 1483 Bridged IP.
Virtual Circuit ID column, filled with 8 to VPI, VCI filled 81
Then, in the Apply
Ø → PPPoE Encapsulation
Encapsulation column, for settingan PPPoE, select PPPoA, 1483 Bridged IP 1483
Router IP or PPPoE
Virtual Circuit ID column, filled with 8 to VPI, VCI filled 81
On the PPPoE / PPPoA, the username: speedy diikuti@telkom.net number and
password fields filled in accordance with the password
Then, in the Apply
Step 10:
Ø For a → Encapsulation PPPoE, directly to step 17
Ø To the Encapsulation → Bridge, click Start → run → to step 17
Step 11:
appear on the screen will display the following:
Click OK
Step 12:
appear on the screen will display the following:
Type ipconfig, press enter
Step 13:
appear on the screen will display the following:
Type the ping, ping 10.85.250.1 eg press enter
Step 14:
appear on the screen will display the following:
Reply from 10.85.250.1 bytes = 32 time <1ms TTL = "255">
select connect to the internet
Click Next>
select set up my connection manually
Click Next>
select connect using broadband connection that request a user name and password
Click Next>
fill in the ISP name (example: speedy) can also name
Click Next>
add a checkbox on the shorcut this connection my desktop tu
. click finish>
Important note: restat the computer you first ok
Setting automatic modem speedy
Autosetting with the application, he added, customers are not only easier to
install and modem settings, tetepi also reset the settings or
post-activation during maintenance.
"Definitive do with modern settings independently, it will reduce the cost
of installation setter for the customers,"
